Polyamide 6 (PA6) body with EPDM seal (nitrosamine free)
UL 94 V2, halogen free
Operating temperature -40°C to +100°C
Supplied in a pack of 40
Where to use it
The NG20 cable gland seals and strain-relieves cable from 10-14 mm diameter where it enters an enclosure, battery box, combiner box or junction box, keeping out water and dust to IP68.
Fit it in an M20 hole (or M20 threaded entry) and tighten the locknut inside the enclosure, then tighten the dome nut onto the cable.
What's in the box
40 x HellermannTyton NG20 cable gland with locknut
Dimensions
Overall length
42.4 mm
Width across nut
27 mm
Thread length
15 mm
Warranty
Manufacturer's warranty
Applications
4WD
RV's
Caravans
Marine
Off-Grid Systems
Tiny Houses
About HellermannTyton
HellermannTyton designs and manufactures products to fasten, connect, protect and identify cables, including cable ties, copper lugs and links, pre-insulated terminals, bootlace ferrules and cable glands. Its terminals and lugs are made to suit HellermannTyton crimping tools for consistent, reliable terminations.
A nylon cable gland secures and seals cables as they pass through panels or enclosures. It provides strain relief, protects against dust and moisture, and maintains the integrity of electrical or waterproof systems - ideal for solar, marine, and automotive applications.
Yes. Most nylon cable glands are rated to IP68, meaning they are dust-tight and can withstand immersion in water. Always check the specific IP rating of the product to ensure it suits your environment, especially for outdoor or marine installations.
Match the gland size to your cable’s outer diameter. A properly sized gland ensures a tight seal without damaging the cable insulation. Refer to the manufacturer’s sizing chart for guidance - selecting the right size is key to maintaining waterproof and strain-relief performance.