Nylon insulated bootlace ferrule for 10mm² cable, 18 mm pin
Colour coded brown for quick size identification
Insulated collar guides fine strands and protects the conductor
Rated to 600V
Build
Copper pin, polyamide 6.6 (PA66) collar
Halogen free; operating -30°C to +105°C
Supplied in a pack of 50
Where to use it
The BL10-18 ferrule finishes 10mm² fine-stranded cable for screw and spring terminals on solar controllers, inverters, DC breakers, isolators and switchboards, so strands don't splay or break.
Strip the cable to the pin length, insert and crimp with a square or trapezoidal ferrule crimper.
What's in the box
50 x HellermannTyton BL10-18 ferrules
Dimensions
Overall length
28 mm
Pin length
18 mm
Collar diameter
7.6 mm
Warranty
Manufacturer's warranty
Applications
4WD
RV's
Caravans
Off-Grid Systems
Tiny Houses
Cabins
About HellermannTyton
HellermannTyton designs and manufactures products to fasten, connect, protect and identify cables, including cable ties, copper lugs and links, pre-insulated terminals, bootlace ferrules and cable glands. Its terminals and lugs are made to suit HellermannTyton crimping tools for consistent, reliable terminations.
A bootlace ferrule is crimped onto the end of a fine-stranded (flexible) wire so it can be clamped cleanly in a screw or spring terminal. It stops the strands fraying or splaying, gives a solid, low-resistance contact and makes the connection more reliable over time.
Match the ferrule to the cross-section of your wire in mm² (for example 1.5 mm², 2.5 mm² or 6 mm²) and pick a pin length that suits the depth of your terminal. The colour of the insulating sleeve helps you identify the size at a glance.
Use a dedicated bootlace ferrule crimper, which forms a square or hexagonal crimp around the pin. Pliers or standard terminal crimpers won't compress the pin properly and can give a loose connection.
Strip the wire to the pin length of the ferrule so the bare strands fill the metal tube and end flush with its tip, with the insulation pushed up into the nylon sleeve.