12V 40A DC-DC charger with built-in MPPT solar controller (adjustable 5-50A)
Charges from the alternator while driving and from solar when parked: switches automatically
Works from a 12V or 24V vehicle (10.5-16V / 21-32V input) and with smart alternators via the ignition/VSO input
Solar input up to 45V open circuit and 500-800W
Gel, AGM, Flooded, Lithium and fully custom charge profiles
Unit features
Load-sensing smart charging: doesn't mistake running loads for a flat battery
LCD display shows which source is charging, plus status, voltage and current
Battery temperature sensor included
Full 40A output up to 40°C with temperature-controlled fan
M6 screw terminals for large cables; 95% efficient
Where to use it
The DC2DC+ is the all-in-one charger for a caravan, camper trailer, 4WD, motorhome or boat with a lithium or deep cycle house battery. While you drive it charges the house battery from the alternator at up to 40A, at the right voltage for the battery type; when you stop, its built-in MPPT controller takes over from your solar panels, with no relays or extra controllers needed.
It works with smart alternators (connect the ignition-on/VSO input) and with 12V or 24V vehicles. For towed setups, run a proper negative cable from the start battery to the charger, and fuse both the vehicle input and the battery output (70A on a 12V vehicle, 60A on the output). Mount it close to the house battery in a dry spot with airflow.
What's in the box
DC2DC+ charger
Battery temperature sensor
Owner's manual
Dimensions
Height
242 mm
Width
172 mm
Depth
74 mm
Weight
1.85 kg
Safety features
Reverse polarity, over temperature and output short circuit protection
Low input voltage cut-out to protect the start battery
Warranty
5-year Enerdrive warranty
Access to Springers Solar's warranty support team
Applications
Marine
RV's
Caravans
Off-Grid Systems
Tiny Houses
Cabins
More about Enerdrive:
Enerdrive Pty Ltd has been providing independent power systems to the Australian market since 1996. Starting as Advance Trident Limited in 2003 and predominantly servicing the marine industry, ATL saw the huge growth potential in the mobile and recreational vehicle market soon after, and in 2008 ATL Limited morphed into Enerdrive. In recent times Enerdrive has embarked on its own manufacturing program. They saw the need to control their own destiny and produce high-end products that the Australian marketplace was demanding. This program has led to Enerdrive manufacturing their own range of ePOWER AC Battery Chargers & DC2DC Battery Chargers along with Lithium battery systems.