Galvanically isolated: 200V DC between input, output and case
Adjustable output voltage; stable output across the input range (buck-boost)
Remote on/off terminal: no need for a high-current switch
Short circuit proof
Connect any number in parallel for more current
Screw terminals, no special tools needed
Not intended for battery charging - use an Orion-Tr Smart for that
Where to use it
The Orion-Tr 48/24-16A powers 24V equipment from a 48V supply, for example radios, electronics, pumps and lights in trucks, boats, motorhomes and off-grid systems.
The isolated design keeps the input and output separate, which is preferred on boats and where equipment needs its own clean supply or separate ground.
Dimensions
Height
130 mm
Width
186 mm
Depth
70 mm
Weight
1.6 kg
Warranty
5-year warranty
Access to Springers Solar's warranty support team
Authorised Victron dealer
Applications:
Marine
RV's
Motor Homes
4WD
Motor Vehicles
More about Victron:
Victron Energy has a strong, unrivalled reputation for technical innovation, reliability, and build quality. Their products are widely considered to be a professional choice for independent electric power. Efficiently combining two or more distinct power sources is what they do best. Their products include sinewave inverters, sinewave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more.
No. The standard Orion-Tr isolated converters are made to power equipment, not to charge batteries. For battery charging, use a Victron Orion-Tr Smart DC-DC charger or an Alvolta Orbit DC-DC charger.
The input and output are galvanically isolated, with 200V DC between input, output and case. The output has its own separate negative, which is preferred on boats and wherever equipment needs a clean supply or separate ground.
Use the remote on/off terminal. A small switch, or the vehicle ignition or engine run signal, turns the converter on and off, so you don't need a high-current switch in the input cable.
Yes. All models are short circuit proof and any number can be connected in parallel to increase the output current.
Yes. The output voltage is adjustable within the range listed in the specifications (for example 10-15V on 12V output models). Set at or below nominal, the output stays stable across the full input range.
Product Specifications
Input voltage range
40-70V
Under voltage shut down
28V
Under voltage restart
30V
Nominal Output Voltage
24.2 V
Output voltage adjust range
20-30V
Output voltage tolerance
± 0.2 V
Output noise
2 mV rms
Continuous output current (at nominal output voltage and 40 °C)
16 A
Maximum output current (10 s) at nominal output voltage minus 20%
25 A
Short circuit output current
40 A
Continuous output power at 25 °C
430 W
Continuous output power at 40 °C
380 W
Efficiency
89%
No load input current
< 80 mA
Current consumption when disabled
< 200 µA (via remote port)
Galvanic isolation
200 V DC between input, output and case
Operating temperature
-20 to +55 °C (derate 3% per °C above 40 °C)
Humidity
Max. 95% non-condensing
DC Connection
Screw terminals
Maximum cable cross-section
16 mm² (AWG6)
Protection
IP43 when installed with the screw terminals facing down