Insulated Ring Terminal 4-6mm² X 8mm Stud Yellow (50)
Terminal features
Pre-insulated double grip ring terminal for 4.0-6.0mm² cable, M6 stud
Double grip barrel crimps the conductor and the insulation for strain relief
Colour coded yellow for quick size identification
Rated 48A, 600V
Build
Copper terminal with PVC insulation
Supplied in a pack of 50
Where to use it
The RD5-8 ring terminal connects 4.0-6.0mm² cable to an M6 stud or screw on fuse blocks, busbars, batteries, switches and accessories in 12-48V automotive, caravan, marine and off-grid wiring.
Crimp with a ratchet crimper for pre-insulated terminals, using the yellow die. Maximum operating temperature +75°C.
What's in the box
50 x HellermannTyton RD5-8 ring terminals
Dimensions
Length
34.4 mm
Ring width
15 mm
Barrel diameter
6.8 mm
Warranty
Manufacturer's warranty
Applications
4WD
RV's
Caravans
Off-Grid Systems
Tiny Houses
Cabins
About HellermannTyton
HellermannTyton designs and manufactures products to fasten, connect, protect and identify cables, including cable ties, copper lugs and links, pre-insulated terminals, bootlace ferrules and cable glands. Its terminals and lugs are made to suit HellermannTyton crimping tools for consistent, reliable terminations.
Choose by two things: the wire size and the stud or bolt it fits over. The colour tells you the wire range (red 0.5-1.5mm², blue 1.5-2.5mm², yellow 4-6mm²) and the stud size (for example 6mm) tells you which bolt the ring fits. Pick the stud size that matches your terminal post so the ring sits flat and tight.
A double grip terminal crimps onto both the bare conductor and the wire insulation. The second grip on the insulation gives strain relief, so vibration or movement is less likely to fatigue the strands at the crimp.
Use a ratchet crimper with colour-coded dies for pre-insulated terminals, such as the Alvolta Insulated Ratchet Crimping Tool. The ratchet only releases once a full crimp is made, giving a consistent, secure connection. Pliers can crush the insulation and leave a loose crimp.
Strip enough so the bare conductor fills the metal barrel up to the ring, with the wire insulation sitting inside the insulated sleeve. Too short and the crimp may not hold; too long and bare copper is left exposed.